Liste des produits de la marque Any HMD

ProTubeVR has a policy of a high degree of repairability and customization. Our VR accessories are compatible with the controllers of most HMD VRs thanks to controller mounts, which you can clip on with a magnet or fasten to your accessories. In this part of our catalog, you'll find products, upgrades and spare parts that can be used whatever your HMD is.

A ProVolver haptic module without rear cup side right view

A ProVolver haptic module without rear cup side right view 2

In stock

ProVolver

Module haptique du ProVolver sans coupelle arrière

PVLR_MOD_EXP_CAR_

The ProVolver Haptic module without the controller rear mount.To be honest, there is very few reason for you to take it without its rear mount, since our warranty covers you for a long time.If you are a VR game studio, contact us directly for a dev'kit.

Side view of forcetube explorer 5 joules recoil haptic module

Side view of forcetube explorer 5 joules recoil haptic module 2

In stock

Accessoires VR avec haptique

Crosse haptique ForceTube avec recul

STOCK_HAPTIC_FTB_parent

Upgrade your gunstock with this impressive haptic feedback shoulder stock. Feel your game and the impact (literally) of your ingame actions.

Découvrir maintenant

Side view of folded articulated chrome armature for rifle gunstock vr without shoulder-butt with magnetic bracket

Side view of folded articulated chrome armature for rifle gunstock vr without shoulder-butt with magnetic bracket 2

In stock

Fusil et arme d'assaut

Armature de fusil sans crosse ni coupelle

ARMATURE_ALONE_parent

The bare gun stock frame, without controller mounts nor shoulder stock nor sling.Mostly for those who want to customize it. The carbon armature is 60% lighter than the chrome one.

Découvrir maintenant

Right view of a SMG shoulder stock upgrade for Provolver haptic pistol with chrome armature and grey static MK1 stock

Right view of a SMG shoulder stock upgrade for Provolver haptic pistol with chrome armature and grey static MK1 stock 2

In stock

ProVolver

Extension crosse du ProVolver

PVLR_EXT_parent

Upgrade your ProVolver haptic pistol to a carbine or SMG with a shoulder stock.Combined with the front extension, you get a haptic gun stock ready to mimic your virtual rifles and assault weapons.You can even have dual haptic feedback with a ForceTube module hammering your shoulder and the ProVolver kicking in your hand.

Découvrir maintenant

starter extension chrome armature grey mk1 stock side view

starter extension chrome armature grey mk1 stock side view 2

In stock

Starter

Extension SMG avec crosse pour le gunstock Starter

Upgrade your Starter CQB gunstock to adapt to any situation. Close, mid and long-range. You will dominate them all. It transforms your one-tube stock into a two-tube stock, halfway to the MagTube with its 3 parts.

Découvrir maintenant

Side view of carbon MK2 adjustable shoulder stock for vr gunstock

Side view of carbon MK2 adjustable shoulder stock for vr gunstock 2

In stock

Fusil et arme d'assaut

Crosse d'épaule MK2 ajustable

STOCK_STATIC_MK2_parent

Find the perfect alignement when aiming down sight (ADS).Finetune your VR gunstock by adjusting the cheek-rest up and down.Make sure your favorite phrase doesn't become Can it wait for a bit? I am in the middle of some calibrations.

Découvrir maintenant

A retracted bipod for rifle

A retracted bipod for rifle 2

In stock

Pistolet et arme à feu pour VR

Bipode pour sniper

You see that pixel 1km away in your game? That's your target and you will hit it.Perform the best long range shot. Increase your gunstock weight for more realism and immersion.Lie on the floor or lean against a piece of furniture to add stability and feel like a real marksman.

Side view of a carbon MK2 stock spare part without slider

Side view of a carbon MK2 stock spare part without slider 2

In stock

Pièces de rechange

Butée de la crosse MK2 sans le glissière ajustable

STOCK_STATIC_MK2_HANDLE_parent

Want a new color for your adjustable MK2 shoulder stock?Remove the slider from the old one and place it on the new one. It's that simple.

Découvrir maintenant

left view of black carbon butt pad spare parts for ForceTube haptic Explorer module

left view of black carbon butt pad spare parts for ForceTube haptic Explorer module 2

In stock

ForceTube

Ensemble semelle et marteau du module ForceTube

FTB_BUTT_PAD_ASSEMBLY_parent

This is a replacement part for our ForceTube haptic module. This is the part that presses on your shoulder and hammers when the module kicks.If you are still under our 2 years warranty, contact our Customer Service and we will gladly replace it.

Découvrir maintenant

In stock

ProTas

Base joystick ProTas sans coupelle pour manette

PTS_BASE_SOLO_parent

This is the ProTas joystick without controller mount.To benefit from the intercompatibility of our magnetic products (MagTube, ForceTube, Starter, ProTas), you must already own the bottom-mounted magnetic controller mounts (MagCups).

Découvrir maintenant

SWINGiT golf edition handle covered in black foam without controller mount

SWINGiT golf edition handle covered in black foam without controller mount 2

In stock

SWINGiT Golf

Club de golf SWINGiT sans coupelle

SWING_GOLF_HANDLE_ARMCARBLK_

The SwingIt Golf Club without controller mount. For those who already own one, just fasten your non-magnetic mount to it.

Left view of provolver carbon wrist support with bracket

Left view of provolver carbon wrist support with bracket 2

In stock

ProVolver

Support de poignée pour le pistolet ProVolver

PVLR_WRIST_SUPPORT_CAR_

Play longer sessions of intense firefight by adding a wrist support to your ProVolver haptic handgun. Also improves stability when you aim with an outstretched arm. Compatible with left and right ProVolver rear mount. Easily clip/unclip it with its magnetic bracket.

Side view of a magnetic front support to put a left-hand controller mount for a right-handed ProVolver rear-cup

Side view of a magnetic front support to put a left-hand controller mount for a right-handed ProVolver rear-cup 2

In stock

ProVolver

Support avant sans coupelle pour le ProVolver

PVLR_FRONT_EXT_NOCUP_parent

A replacement part for the ProVolver front mount support. Need a magnetic bottom-mounted mount (MagCup) to operate. You can purchase the ProVolver front extension with a controller mount directly.

Découvrir maintenant

Side view of original MK1 static non-haptic grey vr gun buttstock for shoulder point of contact

Side view of original MK1 static non-haptic grey vr gun buttstock for shoulder point of contact 2

In stock

Fusil et arme d'assaut

Crosse d'épaule statique MK1

STOCK_STATIC_MK1_parent

The classic shoulder stock for the MagTube or shoulder extension for the Starter and ProVolver.Simple, lightweight, sturdy.

Découvrir maintenant

side view of a notched bracket to mount on Virtual Realy gunstock rear part

side view of a notched bracket to mount on Virtual Realy gunstock rear part 2

In stock

Pièces de rechange

Monture pour coupelle

The magnetic bracket that holds the controller and its bottom-mounted magnetic mount on our gun frames. Add a second smooth mount to the front part of your VR gun stock (MagTube, ForceTube) to give you two possible positions for your front hand. Generally, the furthest for rifles and the closest for machine pistols. This way, you can quickly switch from...

Découvrir maintenant

side view of a notched bracket for provolver shoulder extension with a transparent tube armature

side view of a notched bracket for provolver shoulder extension with a transparent tube armature 2

In stock

Pièces de rechange

Connecteur d'extension crosse

STOCK_EXT_CONNECTOR_parent

This is a spare part for the shoulder extension upgrade for the Starter and ProVolver.If you are under our 2 years warranty, contact our Customer Service.

Découvrir maintenant

left view of black carbon hammer spare parts for ForceTube haptic Explorer module

left view of black carbon hammer spare parts for ForceTube haptic Explorer module 2

In stock

ForceTube

Marteau du module haptique ForceTube

FTB_HAMMER_parent

This is a replacement part for our ForceTube haptic module. This is the hammer that kicks your shoulder.If you are still under our 2 years warranty, contact our Customer Service and we will gladly replace it.

Découvrir maintenant

left view of black carbon butt plate spare parts for ForceTube haptic Explorer module

left view of black carbon butt plate spare parts for ForceTube haptic Explorer module 2

In stock

ForceTube

Semelle du module haptique ForceTube

FTB_BUTT_PLATE_parent

This is a replacement part for our ForceTube haptic module: the part pressing on your shoulder when aiming and guiding the hammer.If you are still under our 2 years warranty, contact our Customer Service and we will gladly replace it.

Découvrir maintenant

Left view of a set of chrome tubes composed of 130mm and 200mm and 250mm tubes for Pro Tube Gun stock

Left view of a set of chrome tubes composed of 130mm and 200mm and 250mm tubes for Pro Tube Gun stock 2

In stock

Pièces de rechange

Tube

Easily switch from chrome to carbon set, to reduce the weight and improve the look of your accessories.Carbon tubes are 60% lighter than chrome tubes.

Découvrir maintenant

Right top view of a pair of magnets for ProTubeVR accessories with screw and nut

Right top view of a pair of magnets for ProTubeVR accessories with screw and nut 2

In stock

Pièces de rechange

Paire d'aimants

This is a spare part for our magnetic controller mounts: a pair of neodymium magnets. You shouldn't have to buy it. We put it there to show that our products are repairable. Contact our Customer Service and we will gladly replace it if you are under our 2 years warranty.

Découvrir maintenant

An oil flask and 8 oring and 1 smooth washer and 1 notched washer

In stock

Pistolet et arme à feu pour VR

Kit de maintenance pour gunstock

MAINTENANCE_KIT_

Looks like it's time to oil up!After prolonged (months) or intensive use of your gunstock, you may need to replace some of the gaskets. Here's what you need.

Top view of a protas vr hotas grey casing spare part without straps or flexible bracket for controller mount

Top view of a protas vr hotas grey casing spare part without straps or flexible bracket for controller mount 2

In stock

ProTas

Boitier pour le cœur flexible du joystick ProTas

PTS_CASE_parent

To change the color of your ProTas case or replace an old one.

Découvrir maintenant

Front view of the black flexible core of the ProTas joystick

Front view of the black flexible core of the ProTas joystick 2

In stock

ProTas

Cœur flexible du joystick ProTas

A spare part for the ProTas joystick: the flexible core.If you are under our 2 years warranty, contact our Customer Service and we will gladly replace it.

Side view of provolver slide spare part

Side view of provolver slide spare part 2

In stock

ProVolver

Culasse du ProVolver

PVLR_SLIDE_parent

Spare part for ProVolver haptic module slide.The slide mimics the actions of a real one on semi-automatic or automatic pistol to provide additional movement and amplitude to the haptic recoil.We will gladly help you if you contact our Customer Service.

Découvrir maintenant

Affichage 1-24 de 43 article(s)