VR accessories

Showing 17-32 of 80 item(s)

Spare parts

Bolt

The bolts are spare parts for our products. You shouldn't have to buy it. We put it there to show that our products are repairable and what spare parts we use. You can check the dimensions and format to buy it at a tool shop. It will be less expensive, to be honest. Contact our Customer Service and we will gladly help you.

View

In stock

ProTas

Flexible core for ProTas

Any HMD

PTS_FLEX_MAG_

€ 10.00

A spare part for the ProTas joystick: the flexible core.Contact our Customer Service and we will gladly replace it.

An oil flask and 8 oring and 1 smooth washer and 1 notched washer

In stock

Spare parts

Maintenance kit for VR gunstock

Any HMD

MAINTENANCE_KIT_

€ 10.00

Looks like it's time to oil up!After prolonged (months) or intensive use of your gunstock, you may need to replace some of the gaskets. Here's what you need.

Side view of folded articulated chrome armature for rifle gunstock vr without shoulder-butt with magnetic bracket

In stock

Spare parts

VR Gunstock armature without cup or shoulder stock

Any HMD

ARMATURE_ALONE_parent

€ 70.00

The bare gun stock frame, without controller mounts nor shoulder stock nor sling.Mostly for those who want to customize it.The carbon armature is 60% lighter than the chrome one.

View

In stock

Spare parts

USB Bluetooth dongle

Any HMD

USB_BT_DONGLE_

€ 5.00

To pair your haptic module with your computer, it requires 4.2 Bluetooth.We offer a corresponding bluetooth 4.2 dongle with every haptic module purchased, as well as the USB-C cable.

In stock

ProVolver Rear Cup

ProVolver Rear Mount for Quest 2

Meta Quest 2

PVLR_REAR_CUP_Q2_parent

(1 review)

€ 64.00

Upgrade your ProVolver handgun with your VR hardware.Have you switched to Quest 2 VR controllers? Simply replace the rear mount on your ProVolver haptic module.Unclip the old one, clip the new one. It's that simple.

View

In stock

ProTas

Adherent pad for ProTas Joystick

Any HMD

PTS_PAD_

€ 6.00

This adhesive pad for the ProTas base is sticky enough for the ProTas joystick to act as a wall mount for your controllers on a smooth surface.Wash it under water to renew its stickiness like day one.It leaves no traces.

Side view of a carbon MK2 stock spare part without slider

In stock

Spare parts

Butt plate without slider for the Adjustable Stock MK2

Any HMD

STOCK_STATIC_MK2_HANDLE_parent

€ 33.75

This is spare part for our gunstocks: the handle/butt of the adjustable shoulder stock MK2.You shouldn't have to buy it. We put it there to show that our products are repairable.If you are under our 2 years warranty, contact our Customer Service.

View

Spare parts

L nut for ProStraps

Any HMD

PS_Strap_Ecrou

This L-shaped nut is for the ProStrap attachments.You shouldn't have to buy it. We put it there to show that our products are repairable.Contact our Customer Service and we will gladly replace it if you are under our 2 years warranty.

View

In stock

ProStraps

ProStraps Top attachment for Pico 4

Pico 4

PROSTRAPS_TOP_ATTACHEMENT_PICO4_parent

€ 6.00

The ProStraps top attachments are spare parts for our ProStraps cushion pad for Pico 4.If you are under our 2 years warranty, contact our Customer Service and we will help you.

View

In stock

ForceTube

Butt plate for ForceTube haptic module

Any HMD

FTB_BUTT_PLATE_parent

€ 18.00

This is a replacement part for our ForceTube haptic module: the part pressing on your shoulder when aiming and guiding the "hammer".If you are still under our 2 years warranty, contact our Customer Service and we will gladly replace it.

View

In stock

Gunstock for VR FPS

Stock Extension Connector

Any HMD

STOCK_EXT_CONNECTOR_parent

€ 19.00

This is a spare part for the shoulder extension upgrade for the Starter and ProVolver.If you are under our 2 years warranty, contact our Customer Service.

View

In stock

Bottom Mounted Cups

Controller mounts for HTC Vive accessories

HTC Vive

CUP_HTC_parent

€ 30.00

Slot your HTC Vive controllers inside these meticulously shaped mounts.🔄 Intercompability: Switching to a new brand of VR controllers? Get a new set of controller mounts and replace the old ones.🧲 Magnetic mounts: Clip and unclip them easily with the magnets. For the VR gunstocks MagTube, ForceTube and Starter, and the ProTas Joystick.🔒 Fastened mounts:...

View

In stock

Spare parts

Magnet pair

Any HMD

AIMANT_PAIR_

€ 10.00

This is a spare part for our magnetic controller mounts: a pair of neodymium magnets.You shouldn't have to buy it. We put it there to show that our products are repairable.Contact our Customer Service and we will gladly replace it if you are under our 2 years warranty.

Left view of Right hand Grey PLA cups Controller mount spare parts for Focus 3 with Detachable Attachment

In stock

Bottom Mounted Cups

Controller mounts for Focus 3 accessories

Focus 3 / XR Elite

CUP_F3_parent

€ 30.00

Slot your Focus 3 controllers inside these meticulously shaped mounts.🔄 Intercompability: Switching to a new brand of VR controllers? Get a new set of controller mounts and replace the old ones.🧲 Magnetic mounts: Clip and unclip them easily with the magnets. For the VR gunstocks MagTube, ForceTube and Starter, and the ProTas Joystick.🔒 Fastened mounts:...

View

In stock

Bottom Mounted Cups

Controller mounts for Rift CV1 accessories

Oculus Rift CV1

CUP_CV1_parent

€ 30.00

Slot your Rift CV1 controllers inside these meticulously shaped mounts.🔄 Intercompability: Switching to a new brand of VR controllers? Get a new set of controller mounts and replace the old ones.🧲 Magnetic mounts: Clip and unclip them easily with the magnets. For the VR gunstocks MagTube, ForceTube and Starter, and the ProTas Joystick.🔒 Fastened mounts:...

View

Product added to wishlist

Desk Stand for VR Headset and VR Controllers

VR accessories

Bolt

Flexible core for ProTas

Maintenance kit for VR gunstock

VR Gunstock armature without cup or shoulder stock

USB Bluetooth dongle

ProVolver Rear Mount for Quest 2

Adherent pad for ProTas Joystick

Butt plate without slider for the Adjustable Stock MK2

L nut for ProStraps

ProStraps Top attachment for Pico 4

Butt plate for ForceTube haptic module

Stock Extension Connector

Controller mounts for HTC Vive accessories

Magnet pair

Controller mounts for Focus 3 accessories

Controller mounts for Rift CV1 accessories

Subscribe to the newsletter and receive 10% discount code on your first order

About us

VR accessories

Player corner

Business corner

©2016-2025 - ProTubeVR™ | Terms of sales | Shipping and duties | Warranty | Return and Refund