Spare parts

Showing 13-24 of 66 item(s)

Left view of a square nut M4

-15%

In stock

Home

Nut

€ 4.25 € 5.00

Time left

The nuts are spare parts for our products. You shouldn't have to buy it. We put it there to show that our products are repairable. You can check the dimensions and format to buy it at a tool shop. It will be less expensive, to be honest. Contact our Customer Service and we will see how to help you.

View

Front view of a black plastic ring to slide over a tube to attach the shoulder strap's carabiner

-15%

In stock

Spare parts

Sling ring

€ 5.10 € 6.00

Time left

This is spare part for our gunstocks: the sling ring.You shouldn't have to buy it. We put it there to show that our products are repairable. Unless you want to customize your gunstock frame of course.If you are under our 2 years warranty, contact our Customer Service.

Left view of Right hand Grey PLA cups Controller mount spare parts for Pico 4 with Detachable Attachment

-15%

In stock

Bottom Mounted Cups

Controller mounts for Pico 4 accessories

CUP_PICO4_parent

€ 25.50 € 30.00

Time left

Slot your Pico 4 controllers inside these meticulously shaped mounts.🔄 Intercompability: Switching to a new brand of VR controllers? Get a new set of controller mounts and replace the old ones.🧲 Magnetic mounts: Clip and unclip them easily with the magnets. For the VR gunstocks MagTube, ForceTube and Starter, and the ProTas Joystick.🔒 Fastened mounts:...

View

Left view of fastened vr gun stock to magtube gunstock with Black Carbon Fiber cups for Meta Quest 3 and Quest Pro

-15%

In stock

MagTube

Upgrade from fastened stock to MagTube for Quest 3

Meta Quest 3 / 3S / Pro

PRO2MAG_Q3_parent

€ 38.25 € 45.00

Time left

Magnetic brackets and Quest 3 / Quest 3S controller mounts.You have one of our competitors frame, and you want to upgrade it with our magnetic controller mounts.Or perhaps you own one of the first ProTubeVR gunstock with fastened mounts, and you want to upgrade it to a full MagTube gunstock.

View

Front view of the black flexible core of the ProTas joystick

-15%

In stock

ProTas

Flexible core for ProTas

€ 8.50 € 10.00

Time left

A spare part for the ProTas joystick: the flexible core.Contact our Customer Service and we will gladly replace it.

-15%

In stock

Spare parts

USB Bluetooth dongle

€ 4.25 € 5.00

Time left

To pair your haptic module with your computer, it requires 4.2 Bluetooth.We offer a corresponding bluetooth 4.2 dongle with every haptic module purchased, as well as the USB-C cable.

An oil flask and 8 oring and 1 smooth washer and 1 notched washer

-15%

In stock

Spare parts

Maintenance kit for VR gunstock

MAINTENANCE_KIT_

€ 8.50 € 10.00

Time left

Looks like it's time to oil up!After prolonged (months) or intensive use of your gunstock, you may need to replace some of the gaskets. Here's what you need.

Side view of folded articulated chrome armature for rifle gunstock vr without shoulder-butt with magnetic bracket

-15%

In stock

Spare parts

VR Gunstock armature without cup or shoulder stock

ARMATURE_ALONE_parent

€ 59.50 € 70.00

Time left

The bare gun stock frame, without controller mounts nor shoulder stock nor sling.Mostly for those who want to customize it.The carbon armature is 60% lighter than the chrome one.

View

-15%

In stock

ProTas

Adherent pad for ProTas Joystick

€ 5.10 € 6.00

Time left

This adhesive pad for the ProTas base is sticky enough for the ProTas joystick to act as a wall mount for your controllers on a smooth surface.Wash it under water to renew its stickiness like day one.It leaves no traces.

Left view of Right hand Grey PLA cups Controller mount spare parts for Focus 3 with Detachable Attachment

-15%

In stock

Bottom Mounted Cups

Controller mounts for Focus 3 accessories

Focus 3 / XR Elite

€ 25.50 € 30.00

Time left

Slot your Focus 3 controllers inside these meticulously shaped mounts.🔄 Intercompability: Switching to a new brand of VR controllers? Get a new set of controller mounts and replace the old ones.🧲 Magnetic mounts: Clip and unclip them easily with the magnets. For the VR gunstocks MagTube, ForceTube and Starter, and the ProTas Joystick.🔒 Fastened mounts:...

View

Side view of a carbon MK2 stock spare part without slider

In stock

Spare parts

Butt plate without slider for the Adjustable Stock MK2

STOCK_STATIC_MK2_HANDLE_parent

This is spare part for our gunstocks: the handle/butt of the adjustable shoulder stock MK2.You shouldn't have to buy it. We put it there to show that our products are repairable.If you are under our 2 years warranty, contact our Customer Service.

View

left view of black carbon butt plate spare parts for ForceTube haptic Explorer module

In stock

ForceTube

Butt plate for ForceTube haptic module

FTB_BUTT_PLATE_parent

This is a replacement part for our ForceTube haptic module: the part pressing on your shoulder when aiming and guiding the "hammer".If you are still under our 2 years warranty, contact our Customer Service and we will gladly replace it.

View

1
2
3
…
6

Product added to wishlist